tech found that the lower oil pan gasket is starting to leak also the oil filter adapter is starting to leak
OIL FILTER ADAPTOR GASKET – Remove & Replace
ENGINE OIL PAN &/OR GASKET – Remove & Replace – [NOTE: In some cases it may be necessary to R&I Engine. Estimate displayed DOES NOT include Engine removal.]
BRIAN N. gave our service a 5 star review on 2/20/2026
checked to see if there is evidence of exhaust gas in coolant , found none . Removed egr and checked for leaks (none) Called customer to get approval to remove turbo to check for leaks . Removed turbo and found that cylinder #1 Has coolant in it . Based on this the vehicle need a new motor.
David L. gave our service a 5 star review on 12/9/2025
compression test shows that cylinder # 7 only has 55 psi – should be in the 150 psi range we recommend removing head and repair valves (may be other issues and dont know for sure till head is removed )
Alvin M. gave our service a 5 star review on 11/12/2025
P0054 "HO2S Heater Resistance (Bank 1, Sensor 2) P0060 Heated Oxygen Sensor (HO2S) Heater Resistance issue with the Bank 2, Sensor 2 O2 sensor P0403 signifies a malfunction in the Exhaust Gas Recirculation (EGR) circuit P0443 signifies an "Evaporative Emission System Purge Control Valve Circuit Malfunction Tech indicates that there may be a pcm issue . would need to go to black hills auto electric for proper diag
DISC ROTOR – Remove & Replace – RWD Front,Both – [Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary). DOES NOT include refinishing.]
ROC B. gave our service a 5 star review on 8/29/2025
AXLE SHAFT ASSEMBLY – Remove & Install or Remove & Replace – Left Side – [DOES NOT include alignment. NOTE: For Independent Suspension Type Axles, Axle Shaft Assembly consists of Axle Shaft, Boots and Joints.]
warranty
austin b. gave our service a 5 star review on 8/8/2025